|
Re: LT1 GenV swap
Driver side just needs the collector diameter shrunk down to 2.5" before welding itto the header but other thanthat, driver side is done.
Final tube fit great after fully welding it .. phew
Fits great around the motor mount, knock sensor shield and stock linkage
Gonna take the collector to work and use the shrinking cone to see if I can have one less weld...
Clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|