The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

pancake · 06-06-2009, 10:07 PM

Hello All,

Sorry it has been soooo long. I have been realy busy with work.

I did have some time to go to the local yards and find a 25 gallon gas tank for my TBI swap. I also found some of the relays off a Caddy that RF was talking about.

I had a question about the relays RF:

How do I know what wire of the bottom corelates to the number on the top.

EX: relay #85 is the 12 gauge solid red wire, or the 12 gauge purple and black wire?

I am using the relay for a 4 wire O2 sensor.

I beleive I read in the post that you used and adapter plate to mate a TBI to an older manifold. This could save me a lot of time and work. Did you like the adapter plate, or would you modify the stock manifold to fit the older heads?

Thanks again for all you help guys and good to see new posts

.

06-06-2009, 10:07 PM	#213
pancake Registered User Join Date: Apr 2009 Location: Arvada, Colorado Posts: 84	Re: Tbi swap build thread Hello All, Sorry it has been soooo long. I have been realy busy with work. I did have some time to go to the local yards and find a 25 gallon gas tank for my TBI swap. I also found some of the relays off a Caddy that RF was talking about. I had a question about the relays RF: How do I know what wire of the bottom corelates to the number on the top. EX: relay #85 is the 12 gauge solid red wire, or the 12 gauge purple and black wire? I am using the relay for a 4 wire O2 sensor. I beleive I read in the post that you used and adapter plate to mate a TBI to an older manifold. This could save me a lot of time and work. Did you like the adapter plate, or would you modify the stock manifold to fit the older heads? Thanks again for all you help guys and good to see new posts.