Quote:
Originally Posted by VetteVet
If you had a standard column you probably had the fiber optic light to the gear indicator.It's next to the speedometer. The tilts had a regular wired light with the bulb in the column behind the indicator.
Attachment 1646509
The wire can be connected to any of the cluster light wires or there may be a bulb that goes in place of the fiber optic light that the wire can connect to. The normal lights for the instrument cluster connect to pin 8 on the cluster plug, if you have a gauge cluster, or to pin 12 on the plug if you have a idiot light cluster.
There may also be a spade next to the pnl lts fuse in the fuse panel, that you can plug the wire into.
lower right. It will have 12 volts with the headlight switch pulled.
Attachment 1646499
|
That is exactly the place that the old column is connected to. I should be able to remove the fiber optic wire from the bulb and just reinstall the bulb right? Then find a place in the fuse panel to plug in the indicator light from the new tilt column, correct? I really appreciate the help and also the diagrams.