View Single Post
Old 05-14-2017, 10:48 AM   #4
old51sedan
Senior Member
 
old51sedan's Avatar
 
Join Date: Oct 2015
Location: Williamston, Mi
Posts: 868
Re: New tilt automatic column wiring

Quote:
Originally Posted by VetteVet View Post
If you had a standard column you probably had the fiber optic light to the gear indicator.It's next to the speedometer. The tilts had a regular wired light with the bulb in the column behind the indicator.


Attachment 1646509



The wire can be connected to any of the cluster light wires or there may be a bulb that goes in place of the fiber optic light that the wire can connect to. The normal lights for the instrument cluster connect to pin 8 on the cluster plug, if you have a gauge cluster, or to pin 12 on the plug if you have a idiot light cluster.

There may also be a spade next to the pnl lts fuse in the fuse panel, that you can plug the wire into.

lower right. It will have 12 volts with the headlight switch pulled.

Attachment 1646499
I sure appreciate the help, I know have it plugged into the spade next to the PNL and it comes on with the headlights. I have a bigger problem which I posted a few days ago. I don't have any power to the brake lights, backup lights, and turn signals. I've unhooked the 8 wire harness and only have power (12 volt probe) to the black wire (horn) with the key on I also have power to the purple wire (turn signal flasher) and that's it. Do I have a bad ground? I'm really puzzled, can't even drive the truck. Hopefully you have some ideas????
old51sedan is offline   Reply With Quote