View Single Post
Old 05-14-2017, 02:36 PM   #5
VetteVet
Msgt USAF Ret

 
VetteVet's Avatar
 
Join Date: Jan 2005
Location: Kalamazoo, Michigan
Posts: 8,703
Re: New tilt automatic column wiring

Quote:
Originally Posted by old51sedan View Post
I sure appreciate the help, I know have it plugged into the spade next to the PNL and it comes on with the headlights. I have a bigger problem which I posted a few days ago. I don't have any power to the brake lights,[ Orange wire from fuse panel to the brake light switch, then white wire from brake light switch to the column connector] backup lights,[Light green wire from the fuse panel to the neutral safety switch then dark green out through the firewall to the rear BU lights, and turn signals. [check purple wire from fuse panel to the column connector.] I've unhooked the 8 wire harness and only have power (12 volt probe) to the black wire (horn) ; [No power this is a ground wire to the horn relay and the hon button on the steering column.] with the key on I also have power to the purple wire (turn signal flasher) and that's it. Do I have a bad ground? I'm really puzzled, can't even drive the truck. Hopefully you have some ideas????
Gotta go to Mother's Day dinner be back tonight.VV
__________________
VetteVet

metallic green 67 stepside
74 corvette convertible
1965 Harley sportster
1995 Harley wide glide

Growing old is hell, but it beats the alternative.
VetteVet is offline   Reply With Quote