The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

b454rat · 10-05-2010, 07:25 AM

IIRC you can take a pass drop 208 or 241 off a TH400 or 4-speed, open up two holes and it will bolt on.

Or if you have a late model 205 with round 6 pattern and long 32 spline input, Advanced Adapters sells a spacer that will bolt the two together. It's $100 and change. I know you said no adapters or spacers, but just throwing that out.

10-05-2010, 07:25 AM	#2
b454rat Senior Member Join Date: May 2004 Location: Binghamton, NY Posts: 3,453	Re: NV4500 and NP241 questions... IIRC you can take a pass drop 208 or 241 off a TH400 or 4-speed, open up two holes and it will bolt on. Or if you have a late model 205 with round 6 pattern and long 32 spline input, Advanced Adapters sells a spacer that will bolt the two together. It's $100 and change. I know you said no adapters or spacers, but just throwing that out. __________________ 2000 GMC CCSB 454/4L80 6” lift SAS 1999 Chevy CCSB 454/NV4500 6” lift 1999 GMC Yukon 350/4L60 4" SAS