Quote:
Originally Posted by snj8198
The round pattern 205's are getting tougher to find but there are empty aftermarket cases that will bolt directly to the nv4500 tail shaft. I went this route for $300. While apart i installed a 32 spline input gear for $100 (IIRC) freshened up with a master rebuild kit for $150. Total im into the tc for $550, and i eliminated the weak female coupler and didn't need an adapter.
Not to bust your chops Larry but how much are the AA adapters these days?
iirc over all length of my NV4500/205 combo ended up only about 2-3"s longer than the stock 465/205 combo. i did alter my drive shafts.
looks good JJorgensen!
-steve
|
The AA kit cost a hell of a lot more than $300! Send me a link where empty cases can be purchased. I might be sending this AA kit back as soon as it shows up! I am not liking the idea of how far back it is going to push the tcase nor am I a big fan of the female adapter either. I would rather have a 32 spline 205 input round case as well.