Quote:
Originally Posted by jbclassix
I dont know what year GM started using the 4WD switch, but if yours has that, then I would check to make sure that isn't the culprit.
On the 205 you can also remove the PTO cover and gain easy access to your 2HI-4HI shift fork.
Both rods have to move to the NEUTRAL possition for the t-case to be in NEUTRAL. Does the upper one move at all, or only the lower?
|
When you say PTO cover is that the cover straight out the rear of the transfer case?
The truck seems to go into 4 low and a neutral but the shifter just don't feel correct but it will move in 4 wheel low.
Upper rod I can move in and out with a bar but I can't get the bottom one to go either way.
Thanks