Re: 71 C10 with Ford F-100 9in swap
The truck is on the road now, here are the parts I used to complete the swap.
Axle Swap: - Junkyard 75-78ish ford 9" from a pickup with a big cap 1310 yoke
- Junkyard Nodular 3.5 Posi
- Ebay Posi shim kit, shimmed to 100ft*lbs breakaway
- All Star Performance 31 Spline Long Axles (For the right bolt pattern)
- All Star Performance Axle Retaining Plates 72317
- Moroso Wheel Studs 46190
- Wilwood D154R Calipers with the single 2" Piston 120-14876 (70/30 braking) I found a kit on Ebay that came with pads, fittings and flex lines
- Basic Weld-On Rear Disc Brake Kit for 1978-88 GM Caliper, 1.59 In BS (These use Wilwood hats with Speedway Rotors)
- Weld-on Metric Caliper Mounts
Chassis: - CPP 2.5" Drop Spindles CP4S3
- Ride-Tech Front Sway Bar ART-11369120
- Speedway 2" Drop Springs 91006102
- Speedway Rear Lowering Kit (Came with shocks, track bar etc.) 91006575
- T70623 Mirrors. Driver side works well, passengers side is useless.
- Speedway 58.5" Custom Driveshaft with all yokes and u-joints 1310, balanced (Great Deal!) Swap 1310 normal caps for 1310 Ford Big Caps.
Last edited by AlexBC; 04-10-2020 at 09:26 PM.
|