The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**DPowers** · 10-16-2009, 11:35 PM

Jeg's link
http://www.jegs.com/i/JEGS/555/60360/10002/-1

The cooler I bought at a swap meet for $30.00. I made a couple of brackets from some angle to mount it under the radiator behind the bumper. I had to buy two more fittings to be able to plumb the cooler. I got those at a local speed shop and were made by Earl's Plumbing. Jegs has them too.
2 of these:
http://www.jegs.com/i/Earl%26%23039%...82266/10002/-1

and 2 of these:
http://www.jegs.com/i/Earl%26%23039%...00106/10002/-1

The kit has 20 ft of hose and I probably had 4 ft or so left over. I thought about bending lines, but the frustration level is much less this way, I like the look and they lay real nice on the frame in my opionion.

10-16-2009, 11:35 PM	#25
DPowers One foot in front of the other Join Date: Aug 2008 Location: Parrottsville, TN Posts: 5,423	Re: DP's '66 Jeg's link http://www.jegs.com/i/JEGS/555/60360/10002/-1 The cooler I bought at a swap meet for $30.00. I made a couple of brackets from some angle to mount it under the radiator behind the bumper. I had to buy two more fittings to be able to plumb the cooler. I got those at a local speed shop and were made by Earl's Plumbing. Jegs has them too. 2 of these: http://www.jegs.com/i/Earl%26%23039%...82266/10002/-1 and 2 of these: http://www.jegs.com/i/Earl%26%23039%...00106/10002/-1 The kit has 20 ft of hose and I probably had 4 ft or so left over. I thought about bending lines, but the frustration level is much less this way, I like the look and they lay real nice on the frame in my opionion.