The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - First hand experience with changing to the NBS master cylinder WOW!

Kudzupatch · 04-14-2015, 08:40 AM

FYI Tried this on a 1993 Suburban with the large 4 wheel anti-lock module and it would require pretty serious line bending. I think it would ended up crimping the line. I think it would be simpler to just make new lines between the proportioning valve and the MC.

My MC gave up and I had to replace it so I can go a trip. So I went back with a replacement unit. Will look at this latter when I have time.

04-14-2015, 08:40 AM	#127
Kudzupatch Registered User Join Date: Apr 2013 Location: GUNTERSVILLE Posts: 621	Re: First hand experience with changing to the NBS master cylinder WOW! FYI Tried this on a 1993 Suburban with the large 4 wheel anti-lock module and it would require pretty serious line bending. I think it would ended up crimping the line. I think it would be simpler to just make new lines between the proportioning valve and the MC. My MC gave up and I had to replace it so I can go a trip. So I went back with a replacement unit. Will look at this latter when I have time.