Quote:
Originally Posted by 66_k10_manny
Just installed front disc brakes with mc and booster on my 66k10. The mc and booster come from a 97 blazer. Brakes are working great but my pedal drops down almost to the floor board. Thought i might have a bad booster so i swapped it out yesterday and no change. The brakes start grabbing with the pedal pushed about 1/3 of the way down and then full grab at about 2/3 down. With the engine off, if i pump the brake pedal, it firms up and stops at about half way down. If i then fire the engine up, the pedal drops down the rest of the way. May be this is the normal travel? Anyone have ideas or suggestions?
|
I have this exact same problem in my truck that is almost back on the road. I am actually using the same master cylinder and booster as you too. I have already modified the pushrod so that there is no clearance between it and the master cylinder when everything is bolted together.
What solution did you come up with for this problem?
Thanks,
Derek