[likaroc13]

Originally Posted by lucky_7

Yes I am more worried about tire/fender clearance, I drive responsibly as my youth taught me a great deal about safe driving......(I was once a horrible driver). I can however still get a different size tire for the front if needed, (suggestions?) As for under the truck, it looks like there's nothing hanging low enough to drag at 4/6, I will measure again before the surgery...

I'm going to stick with black wheels right now, as they seem to go with most colors. And the powder coat might be a little expensive, the local shop charges 65 a wheel but they do not use a acid wash, so I'm going to try an epoxy spray paint. My friend informed me it was much more durable than other paints.

On the exhaust I'm thinking 2 flow masters dumped before the diff, I think they sound the best when the sound has a chance to "bounce" a little underneath the bed. I also might get some headers. Not sure yet...any clearance issues there?

So more on the drop, what it the best way to cut out the mini notch, I have access to a torch, multiple saws, grinders, drills, and welder. I will only have 2 1/2 days to work on it when I do it so a lot of prep is good for me. On the front, spindles should keep the camber straight, right?
Posted via Mobile Device

Sounds good on the paint. What's the width on those wheels? As for exhaust, that should be fine if you don't mind any droning that occurs. I ran Gibson stainless shorty headers on my old truck. I'll let the experts chime in about cutting for the notch, as I had that professionally done as well.