Re: Dash issue
Quote:
Originally Posted by Rick Bollinger
There are 2 screws that hold the printed circuit board to the panel. They are ground screws that take the ground "wire" in the circuit and grounds it to the dash and the ground side of the light socket. if those screws are dirty or loose they will not make a good contact and cause all kinds of issues with the dash lights and turn signals on the dash. So be sure to check these as well.
|
Number one issue for this problem.
__________________
Contact me on all of your gauge cluster needs. I specialize in restoration, repair and parts sales for 67-72 Chevy and GMC trucks. email me at tbonegarris@yahoo.com
I am also a dealer for Counterpart for gauge cluster parts only.
Also see my facebook page, CG&C
|