[gringoloco]

Originally Posted by smbrouss70

BTW, this explanation from Livrat sounds like the easiest way to correctly locate the holes for a 4x4 to 2wd swap. I don't know if you have access to a set of front framerails off of a 2wd truck though.

I do like this method, though it seems like you’d use a lot of cutoff wheels if you’re a regular guy like me without a plasma cutter. It think it would be easier to build a paper template or rubbing transfer. I at least have access to a torn-down C10, though there is a dropmember in the way now. Wish I’d had the foresight to build a template while it was apart Regardless, I may not end up in exactly the stock position, but we’ll see!