The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 47-55.1 Starting a 52 Chevy 3100 Project.

28TudorAZ · 10-23-2018, 12:51 AM

So I got the cab back on over the weekend and welded up the firewall holes and bolted it up. Also today I had the day off and put the 2" lowering blocks on the back axle and welded up a bunch of holes on the inside and old fuel filler hole. I also ordered a steering column, steering shaft, steering joints, transmission cooler, a 16 inch fan and a pedal assembly today. This should keep me busy for a while. Not that I don't have anything to do but I like to skip around so I don't get frustrated or bored. Plus I can't put the front end back on till all of this is on there.

10-23-2018, 12:51 AM	#108
28TudorAZ Registered User Join Date: May 2018 Location: Phoenix, AZ Posts: 314	Re: Starting a 52 Chevy 3100 Project. So I got the cab back on over the weekend and welded up the firewall holes and bolted it up. Also today I had the day off and put the 2" lowering blocks on the back axle and welded up a bunch of holes on the inside and old fuel filler hole. I also ordered a steering column, steering shaft, steering joints, transmission cooler, a 16 inch fan and a pedal assembly today. This should keep me busy for a while. Not that I don't have anything to do but I like to skip around so I don't get frustrated or bored. Plus I can't put the front end back on till all of this is on there. Attached Images Last edited by 28TudorAZ; 10-25-2018 at 07:42 PM.