[Nessmuk]

Carb to firewall, drill a hole, and then under the drivers side carpet, cut a small bit of the door seal and route it under the door, bring it across to the transmission tunnel and drill a hole, bring it across under the seat, drill anther hole, go through that to under the truck, run it back by wrapping it around the exhaust, cut the hose and splice it back together, run it across in front of the Cross member, use the good quality pipe cleaners to secure it there, run it up the frame, use stove pipe wire to secure it there, find a hole in the frame, go through that and back to the tank, then your there, just like I do it. Oh, and use the cheap made in China clamps, it'll be fine. Easy peazy.