The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**PGSigns** · 01-27-2015, 07:53 AM

I set the distributor in the hole where I want it and just bump the engine. Drops right down. Bring it back around to where I want to set the timing to and line the rotor up with the mark on the distributor for the number one wire. Snug it up and done, ready to put the cap on and run it to set it with the light. Takes a couple of minutes at most.
Jimmy

01-27-2015, 07:53 AM	#2
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: oil pump alignmen tool I set the distributor in the hole where I want it and just bump the engine. Drops right down. Bring it back around to where I want to set the timing to and line the rotor up with the mark on the distributor for the number one wire. Snug it up and done, ready to put the cap on and run it to set it with the light. Takes a couple of minutes at most. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic