Quote:
Originally Posted by my67chevytruck
what am i missing on the upper balljoints. is the spindle hitting the UCA? I just tore down my sons front end over the past weekend and i will need to know..... I also was not aware of the 1" vs. 1 1/4" rotors.
|
In the first couple pics the BJs are just finger tight
When I tightened them down the upper A-arm is rubbing the top of the spindle
I think the upper BJ is just too small around & isnt seating in the spindle, so Ima go to the parts store & see if the spec a different one for 1-1/4" rotor applications
Ima double check on the lower, but it seemed just fine
Just FYI, I have all 73-87 front suspension under the front of my truck: 85 lower A-arms, 84 upper A-arms, 84 crossmember, 78 rotors & calipers & CPP 73-87 drop spindles