The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Zachary17 · 01-18-2017, 07:59 PM

So for anybody wondering what I have done to the truck as of now here's the list. Front end.
Ball joints
U joints
Spindle bearings and seals
All four tie rods moog
New rotors pads calipers and hoses
Hub bearings and races and wheel seals
New steering stabilizer
And the steering disk at the box
rear end
Drums shoes wheel cylinders rear hose
And all the hardware.and that's just a part of it the 700 needs a rebuild and the case is leaking.

01-18-2017, 07:59 PM	#7
Zachary17 Registered User Join Date: Jan 2017 Location: Brownsville tn Posts: 152	Re: 1987 gmc jimmy dally driver build So for anybody wondering what I have done to the truck as of now here's the list. Front end. Ball joints U joints Spindle bearings and seals All four tie rods moog New rotors pads calipers and hoses Hub bearings and races and wheel seals New steering stabilizer And the steering disk at the box rear end Drums shoes wheel cylinders rear hose And all the hardware.and that's just a part of it the 700 needs a rebuild and the case is leaking.