[Strider]

The Guys at ECE told me that their rear end conversion kit or deluxe track bar kit was for use only with lowered vehicles (ones that had been lowered 4 inches or more).
Apparently the geometry would change and the panhard bar in the kit is only meant or designed for lowered vehicles. I thought I would use this kit with a 1991 10 bolt I have (3.08 gears) and then I would be able to keep the rear end centered using their panhard bar from this kit that bolts to the passenger side rear trailing arm ( as the 1991 10 bolt does not have the stud on the top of the pumpkin for the stock panhard bar.).
So.......................i'm F - - - E D as of now because I don't know if I should buy the kit and do the swap or not based on what they told me.