The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs...

**jkeating1** · 11-09-2018, 11:07 PM

Quick question regarding post 32 (waaaay back there): "I had the axles reworked at Dutchman's to fit the S2000 rotors. They are 5x4.5" and just happen to be the same pattern as the wheels you may have noticed in some of the previous pics. While at Dutchman's I had new bearings and retainers pressed on."

Did that mean to say, "...had the S2000 rotors reworked to fit the axles"? I'm looking at doing a similar retrofit, and it looks like the rotors were re-drilled to the existing pattern of the DJ-5. And are DJ's 5x4.5 stock (smaller than CJ's 5x5), or is that what was reworked?

11-09-2018, 11:07 PM	#2474
jkeating1 Senior Member Join Date: Dec 2012 Location: Allen, TX Posts: 519	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Quick question regarding post 32 (waaaay back there): "I had the axles reworked at Dutchman's to fit the S2000 rotors. They are 5x4.5" and just happen to be the same pattern as the wheels you may have noticed in some of the previous pics. While at Dutchman's I had new bearings and retainers pressed on." Did that mean to say, "...had the S2000 rotors reworked to fit the axles"? I'm looking at doing a similar retrofit, and it looks like the rotors were re-drilled to the existing pattern of the DJ-5. And are DJ's 5x4.5 stock (smaller than CJ's 5x5), or is that what was reworked? Last edited by jkeating1; 11-09-2018 at 11:14 PM.