The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - LS engine swap into 1966 c10; fuel tank install

ram153624 · 01-26-2013, 11:19 PM

Thanks to all who have replied so far.
Redrocketal I searched all possibilities, but could not come up with the article. I wonder if you recall if they used all factory parts? If so, I bet that the suggestions from Blue666 and jayoldschool will provide the solution. I have several LT1 tanks and pumps saved from surplused police cars I have parted out, but I believe the LT1 pump output will be marginal for an LS engine. Maybe a LS pump on an LT1 sender will work, or as suggested, an LS pump on the s10 sender, and I can probably adjust the pump depth to work. Raic 65 I'll call your supplier on Monday. Thanks to all.

01-26-2013, 11:19 PM	#9
ram153624 Registered User Join Date: Oct 2012 Location: Marietta, GA Posts: 44	Re: LS engine swap into 1966 c10; fuel tank install Thanks to all who have replied so far. Redrocketal I searched all possibilities, but could not come up with the article. I wonder if you recall if they used all factory parts? If so, I bet that the suggestions from Blue666 and jayoldschool will provide the solution. I have several LT1 tanks and pumps saved from surplused police cars I have parted out, but I believe the LT1 pump output will be marginal for an LS engine. Maybe a LS pump on an LT1 sender will work, or as suggested, an LS pump on the s10 sender, and I can probably adjust the pump depth to work. Raic 65 I'll call your supplier on Monday. Thanks to all.