The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - A quick look at the Hickey worm gear winch

Orange Crate · 11-19-2017, 12:36 PM

jeffahart
Thanks for those pictures. I edited the color of the first one and can clearly see how yours mounts. My mounts are slightly different. I have those angled "feet" on both front and back mount and I do not have any angle iron. I can also see that you have the angle iron on the rear and my aft piece it is 3/8" flat stock with the "feet" welded on. I would hate to have to give up that mount as it is really beefy so I'll take a look at moving the feet. If you zoom in on the attached pic you can see both of the mounts that came with my winch. Thanks again for the pics.

11-19-2017, 12:36 PM	#102
Orange Crate Registered User Join Date: Feb 2011 Location: Under the Truck Dreaming Posts: 642	Re: A quick look at the Hickey worm gear winch jeffahart Thanks for those pictures. I edited the color of the first one and can clearly see how yours mounts. My mounts are slightly different. I have those angled "feet" on both front and back mount and I do not have any angle iron. I can also see that you have the angle iron on the rear and my aft piece it is 3/8" flat stock with the "feet" welded on. I would hate to have to give up that mount as it is really beefy so I'll take a look at moving the feet. If you zoom in on the attached pic you can see both of the mounts that came with my winch. Thanks again for the pics. Attached Images __________________ 72 K20 Custom Camper, D60, 14BFF, full roller 406 TPI w custom built ECU and yes..it has tow hooks...