View Single Post
Old 11-23-2017, 11:35 AM   #106
Orange Crate
Registered User
 
Orange Crate's Avatar
 
Join Date: Feb 2011
Location: Under the Truck Dreaming
Posts: 642
Re: A quick look at the Hickey worm gear winch

So I ended up reusing the mounts that came with the winch. I cut the feet off of the rear mount and re-welded them. At the same time I put the mounts on top of the frame before re-welding. It was a good thing that I cut those feet off the mount, it didn't take much, just two quick cuts with a cut off wheel and they snapped right off. The rear mount is 1/2' thick but the feet were just butt welded. The 1/2" ends weren't beveled to provide good penetration of the weld. I beveled the ends and used to passes to fill in the valleys. First pic is drives side and second is the other. I have plenty of clearance from the motor to the radiator support. I just have to reverse the hardware for my tow hooks and maybe work on the winch mount ends a little to remove some material to let the bolts fit beside them. Alright it's cookin' time. Happy T day.
Attached Images
   
__________________
72 K20 Custom Camper, D60, 14BFF, full roller 406 TPI w custom built ECU and yes..it has tow hooks...
Orange Crate is offline   Reply With Quote