The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**Blazerowner** · 03-27-2018, 07:24 PM

A little more progress. Everything seems to be lining up great with the Tilden Cross-member. It will be a little tight up front for the accessories, but that is only due to me keeping the stock location for the t-case. So far I have a couple inches of space when I measure. The Holley pan has plenty of clearance. One issue I have is the transmission is cocked to the right. Not sure why. I'm going to try to get it to move over when I have a friend over to put more effort in it.

03-27-2018, 07:24 PM	#21
Blazerowner Senior Member Join Date: Apr 2006 Location: Yuba City, Ca Posts: 1,920	Re: LS Swap Crossmember choices A little more progress. Everything seems to be lining up great with the Tilden Cross-member. It will be a little tight up front for the accessories, but that is only due to me keeping the stock location for the t-case. So far I have a couple inches of space when I measure. The Holley pan has plenty of clearance. One issue I have is the transmission is cocked to the right. Not sure why. I'm going to try to get it to move over when I have a friend over to put more effort in it. Attached Images __________________ Kirk 72 Blazer CST 4wd highlander 66 Nova Last edited by Blazerowner; 03-27-2018 at 07:30 PM.