[nitrosport_5]

Originally Posted by dozerbill72

Yes, you can use the center section from the C20 in yours. The locker is a bolt in process, you will have to pull the carrier to do it. As you pull it apart lay everything out in the order it comes out so you can put back the same way. Do you have another front axle geared to match or are you swapping gears in it?

Thanks for the info, im going to try and pick up that c20 axle for parts.

I dont have another front, but the d44 i wasnt too worried about since parts are much easier to find. I figured i would get the rear setup first and buy a gear set to match for the front.