The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

walleye1 · 11-19-2003, 07:02 PM

Yes, I've done it. It wasn't too bad. Use the previous link for info. go to your local chevy parts dealer and ask for a line drawing of the whole assembly. It took me about 4 hours total and I'm no mechanic. I think it took longer to remove all the heater/defroster junk than the actual core. Good luck. walleye1 ps... remember to drain down your antifreeze or you'll get real wet and sticky!

11-19-2003, 07:02 PM	#3
walleye1 Registered User Join Date: Nov 2003 Posts: 10	Yes, I've done it. It wasn't too bad. Use the previous link for info. go to your local chevy parts dealer and ask for a line drawing of the whole assembly. It took me about 4 hours total and I'm no mechanic. I think it took longer to remove all the heater/defroster junk than the actual core. Good luck. walleye1 ps... remember to drain down your antifreeze or you'll get real wet and sticky! Last edited by walleye1; 11-19-2003 at 11:09 PM.