The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Outlaw72 · 06-19-2017, 10:44 PM

Welding the tubes is cheap insurance. I'm running the stock spline count but the axles are Moser. I haven't had any issues and well over 600hp.

06-19-2017, 10:44 PM	#2
Outlaw72 Hay Team!! Join Date: Jun 2003 Location: Ft. Worth, TX, USA Posts: 366	Re: rear axle advice Welding the tubes is cheap insurance. I'm running the stock spline count but the axles are Moser. I haven't had any issues and well over 600hp. __________________ 1972 Chevrolet Cheyenne LWB "Orange and White" 8)