Quote:
Originally Posted by 95 S_Trucker
Have someone scan the ABS system for codes.
My guess is you'll have an EBCM Relay circuit code. C0265, and possibly some communication codes.
If you have those codes, you'll need to check the ground.
|
YEAH! thats the code/condition i was referring to. I just couldnt remember the code number.
Quote:
Originally Posted by 95 S_Trucker
Also, check the brake fluid level, there is a sensor in the reservoir that will turn the red brake light on when the brake fluid is low. If the fluid is low, check the steel brake lines. They rust out on these trucks. Sometimes its a pinhole, other times it can be catastrophic.
|
he did state that the reservoir is full, which is why i was leaning toward the ground.
I am new to these trucks and so i havent even fixed my grounding issue yet. I am ever hopeful that the issue is the ground and not a BAD EBCM. the ABS module where i would assume the EBCM is located appears to be a major PITA to replace.
-Izzy
__________________
WHO_DCTC - Wifes 05 Z-71 Build - Now defunct as she decided she wants an Escalade too
Cream Puff - LS'd Square - Slow going on the back burner
Tripple Threat - 3 Wrecks for the price of one build thread
Project Delongdium - Step-Sons Plastic Clad 2003 Avalanche - DONE and Delivered.