|
Re: LT1 GenV swap
Stock stuff needs to be modified. I drew up some adapters, had em 3d printed and was spot on.. goal was to have a shop make a run of em but not enough interest to invest in.
Low side tube was completely removed and reworked from compressor pad with some scrap bends.
High side was tweaked and twisted and then a tube bit brazed on after the stock sensor.
Clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|