View Single Post
Old 01-20-2013, 06:23 PM   #15
Blue97
Registered User
 
Blue97's Avatar
 
Join Date: Aug 2012
Location: Fort Mohave/BHC AZ
Posts: 349
Re: remove power assist steering on 97 Silverado?

Quote:
Originally Posted by Boog View Post
Unplugging the sensor on the power steering pump will allow full power assist full time. No more twichyness in turns.
You may be able to swap the valve in the pump with one from a 96 if you prefer that feel better. It is the fitting that screws into the rear of the pump that the high pressure hose screws into.
My 97 drove just fine with just the sensor disconnected.
Takes 2 minutes to unplug it and give it a try yourself. It's free.
Ok great thanks for the info, now if i was to install a 96 ps pump would that be the same as just unplugging this stupid pressure switch?

i was thinking if i can install a 96 pump lines and gearbox then i might have better steering without and interference or am i just wasting more money.

I did just put in a new reman gearbox but....... im willing to change it out again to fix it
Blue97 is offline   Reply With Quote