|
Re: Let's Build A 1 Ton Crew Cab 4x4
Quote:
Originally Posted by marvgarr68
You can get manual hubs for the 44 you have under it already. The frames are different big time between 3/4 and 1 tons. My k20 frame is around 6 or 7 inch tall at the tallest part under cab and my c3500 is over 8 and a lot thicker. My c3500 is also a camper special 10,000 gvw which I think doesn't matter.
|
I don't have a 44 currently. Well I do but it is under my 87 that I am LS swapping. The rusty 78 has the dana 60 under it.
I had looked at the two frames and I noticed they were different but I had other people tell me other wise. The rear spring hangers on the 78 4x4 1 ton are rusted away pretty much too and they seem a lot smaller than what I am used to as well. I have a spare set from a k5 I think but they look a lot different.
__________________
1988 GMC R3500- Cut Brothers 4WD Conversion Kit, 6.5 TD NV4500/NP208 D60 14BFF
2020 1500 Silverado 3.0 Babymax
2002 2500 Silverado- 6.6/ Allison
2010 CTS V- The "NastyBuzzard"
1979 Trans Am - Eventually getting 6.0/T56 swap with boost
|