12-27-2017, 01:19 PM
|
#12
|
|
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,936
|
Re: How to wire electric fans to stay on for a few minutes after engine is shut off?
Quote:
Originally Posted by gmachinz
Just fyi...push-in style probes are accurate to +\- 10 degrees whereas a temp switch is +\-3 degrees. Sounds like you basically have the fan wired the way which works for ya-are you using a deep cycle battery or no?
|
No deep cycle just regular battery. The cooling effect after the motor is shut off is min. so if everything is working like it should the temp will be close to the 180* so that the fans only run for a few seconds after the motor is off.
I have drove them both and waited to see how they do and the most time the fan stayed on was 1 minute.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver
Seeing the USA in a 71
Upstate SC GM Truck Club
2013,14 and 2016 Hot Rod Pour Tour
http://upstategmtrucks.com/
Get out and drive the truck this summer and have some fun!
It sucks not being able to hear!
LWB trucks rule, if you don't think so measure your SWB!
After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.
|
|
|