I spent some time this morning working on the passenger fender. I guessed it was hiding some damage as the core support on that side was damaged a little. From then inside there were several holes with bondo coming out of them and about a 3/4" deep dent. OUCH.
I cleaned off all the bondo
I had to remove this brace to have access for the hammer on the inside
This is what I ended up with after some hammering. Not to bad will still require some bondo but not 1/2" thick at least
I switched gears after that and starting stripping all the front suspension. Here is where I ended for the day.
Bret