Re: 1967 Shop truck from a beater [build ]
More, decided not to move the X member. Way too many rivets. Cut it at the 21 1/4 " mark and left a good eighth inch for a really good weld on the frame. May add some 1/2" bolts to either side of the brace after I get it rolling, but it looks as though it is not going any where. I used the two old rear body mount holes to plug weld my stiffener in place. I just relocated my body mounts where they should be on a shortie.
Last edited by tutone; 05-06-2017 at 07:59 PM.
Reason: Added text
|