|
Re: 250L6 to 71 350 - Can I use the 250L6 Pressure plate setup on the 350?
Quote:
Originally Posted by Accelo
Don't forget you will need to install a pilot bushing into the crankshaft.
All the crankshafts had the hole to install one but only the manual transmission vehicles had the pilot bearing/bushing installed.
Don't confuse what is sometimes called a "pilot bearing" with an actual roller bearing. They were sintered bronze bushings from the factory.
Lots of people interchange the two terms:
"pilot bearing" & "pilot bushing."
|
Great point, thank you! 
__________________
1971 Chev C10 - 250ci L6 w/3 speed on the floor
Upgrades: Power Steering
3 Core Radiator
7 Hole Gauge Cluster
Power Brakes (Incoming!!..)
1971 350 (Incoming!!..)
|