Quote:
Originally Posted by dirtybirdindian
Looks like +/- 36 1/2" from the center of the axle to the end of the frame rail.
Wouldn't I be able to put the kit in using the stock axle and save the axle brackets to weld on a different rear end when I get one?
What changes have to be made at the transmission output when going to an open rear end?
|
You will have to get the parts from a 3/4 to 1 1/2 ton transmission. they had open drivelines.I don't remember if the half ton output shaft is the same though.I think it is.
you will need the rear bearing retainer(cover) with the seal and the yoke. you will also need a drive line. I would get one that fits one end or the otherat a wrecking yard that is too long. and get it shortened.
hope this helps