|
Re: "Project Orangepeel" 52 A.D
Well let's get this finished up!
Pic 1. Here is the Idea....The bed rail is Really beat up (dug out a lot of filler)
So I am using a plate of 18g sheet metal to make it flat and that way the filler cap will look flush.
Pic 2. Plate all spot welded in and ready for final weld.
Pic 3. This kinda shows how the filler will have the sunk look.
Pic 4. This is a shot showing the filler neck after I welded,smoothed and tapered it.
Mark
|