Re: Engine Analyzer and Drag Analyzer.. Willing to put your info in.
bore=101.6mm
stroke=92mm
9.2cr
750 proform mech secondaries
heads have 2.165 int and 1.59exh
260cc int port/90cc exh port
.200=148/126
.300=212/162
.400=264/189
.500=302/205
.600=322/214
.700=316/221
gm open plenum single plane intake
cam XR281HR hydraulic roller
dur @ 50 228/230
lift 571/573
lsa 112
icl 110
3800lbs with driver
3.73 gears
posi
315/60-15 mickey thompson drag radial
29.9" tall,,,11.5" wide
old covertor ptc street fighter flashed to 36-800
new ptc super street fighter flashes to 4600
doug thorley tri-ys
I think they are 1 3/4 ,, 3" exhaust
Last edited by 1FAST68; 12-05-2008 at 10:31 PM.
Reason: forgot exhaust
|