The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 63-72 Chevy P/U Rear Shock Mount System

**robnolimit** · 09-27-2011, 01:46 PM

The rear specs I have are as follows. From the rear tip of the frame to the rear axle centerline is 34". From the rear tip of the frame to the center of the 5/8" hole is 17 1/2". So, from the axle centerline back to the center of th 5/8" hole is 16 1/2". The first two numbers are for shortbeds. The third measurement, 16 1/2", is good for any truck.

09-27-2011, 01:46 PM	#52
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: 63-72 Chevy P/U Rear Shock Mount System The rear specs I have are as follows. From the rear tip of the frame to the rear axle centerline is 34". From the rear tip of the frame to the center of the 5/8" hole is 17 1/2". So, from the axle centerline back to the center of th 5/8" hole is 16 1/2". The first two numbers are for shortbeds. The third measurement, 16 1/2", is good for any truck. __________________ GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others!