The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 78 2wd Blazer

phillipm · 09-07-2016, 06:29 PM

Thought I'd let you guys know what we're up to. While I wait to get my new seats back from the upholstery guy, I decided to go ahead and C notch the truck. I used the same pipe that I used for the exhaust channels. Used a 4.5" hole saw to cut the frame and then welded in a boxing plate that I cut from 3/16" hot rolled steel plate. Got 1/2 done on Sunday and plan to try and finish it up tonight on the drivers side.

09-07-2016, 06:29 PM	#118
phillipm Registered User Join Date: Oct 2014 Location: Scottsdale, AZ Posts: 465	Re: 78 2wd Blazer - LS Swap and more.. Thought I'd let you guys know what we're up to. While I wait to get my new seats back from the upholstery guy, I decided to go ahead and C notch the truck. I used the same pipe that I used for the exhaust channels. Used a 4.5" hole saw to cut the frame and then welded in a boxing plate that I cut from 3/16" hot rolled steel plate. Got 1/2 done on Sunday and plan to try and finish it up tonight on the drivers side. Last edited by phillipm; 09-21-2017 at 12:43 PM.