The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**CUSTOM/10** · 09-04-2009, 11:52 AM

The latest work I did was have a custom front drive shaft made up by Tom Woods. With the 700R4 and the 4 bolt flange type front out put ( Later model NP205 ) there wasn't enough clearance between the CV joint & the 700 pan. Even with the smaller CV joint and dimpling the pan it's still close.

Other than that I've been collecting parts, new seat cover, blower motor, carpet, NOS arm rests, head light bezels, shifter boot & ring, gauge bezel. lots of goody's.

The house is my current project, painting and changing things to make it my house !!!

09-04-2009, 11:52 AM	#81
CUSTOM/10 Senior Member Join Date: May 2003 Location: Sandown, NH Posts: 2,796	Re: Project; Divorce Therapy ( 72 SWB 4x4 ) The latest work I did was have a custom front drive shaft made up by Tom Woods. With the 700R4 and the 4 bolt flange type front out put ( Later model NP205 ) there wasn't enough clearance between the CV joint & the 700 pan. Even with the smaller CV joint and dimpling the pan it's still close. Other than that I've been collecting parts, new seat cover, blower motor, carpet, NOS arm rests, head light bezels, shifter boot & ring, gauge bezel. lots of goody's. The house is my current project, painting and changing things to make it my house !!! Attached Images __________________ Gary 72 SWB 4x4 My 72 SWB Build http://67-72chevytrucks.com/vboard/s...d.php?t=259859 Last edited by CUSTOM/10; 09-04-2009 at 01:27 PM.