The hole in the firewall is square. The Lokar cable wont be able to tighten down on the firewall with the supplied parts from Lokar. You can use some washers, although I don't know what size needed. I used two billet spacers that came with the Lokar pedal. If you look at the picture of the throttle cable going into the firewall, you'll see what I'm talking about.
So anyone using a Lokar throttle cable, make note that you'll have to do something to make it stay put at the firewall and attach to the rod on the pedal. I uploaded a picture somewhere on the first page showing a rod I twisted on an oem throttle pedal.
Posted via Mobile Device
|