View Single Post
Old 06-14-2011, 11:32 PM   #2
jbclassix
Junk Yartist
 
jbclassix's Avatar
 
Join Date: Jul 2009
Location: Greeley, CO
Posts: 2,201
Re: NP 205 Rebuild and Info

First I removed my rear output yoke. This is my home-made yoke holding fixture that has come in VERY handy over the years!



With the t-case in 4-hi I also removed the front yoke while holding the rear yoke.



Remove the speedo drive assembly



Remove the rear seal housing



The rear output bearing just slides off. It is "sandwiched between the yoke and speedo gear



Remove the speedo drive gear



Remove the spacer from behind the speedo gear



Remove the rear bearing housing. Be careful removing the housing, the front bearing is a needle type and they will fall out.



__________________
-Jeremy

YOU ONLY FAIL IF YOU STOP TRYING

70 Crew Cab Build Link

70 GMC Suburban 4X4 build thread

95 Yukon Daily Driver

Rebuilding an NP205
jbclassix is offline   Reply With Quote