The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**robnolimit** · 10-05-2010, 01:40 PM

The H kit is nice, but $$ +. I am currently looking at a bunch of A-Arms. The key is, You can only fix so much. If you're not changing the inner pivits of the suspension, and the geometry of the spindle is the same, there isn't a lot you can do. What they need is more caster. Combined with a spring, spindle and swaybar, they can be made to handle very well. The A-arms can be made to correct the ball joint angles, assist in camber gain, and get the caster in line. And this is what you need. I have about six sets of arms in my shop that I am testing to find out what they REALLY DO, and DONT. So, be a little patient and I'll let you know what I find out.

10-05-2010, 01:40 PM	#117
robnolimit Senior Member Join Date: Jul 2010 Location: Dandridge, Tn. USA Posts: 2,226	Re: Make it handle The H kit is nice, but $$ +. I am currently looking at a bunch of A-Arms. The key is, You can only fix so much. If you're not changing the inner pivits of the suspension, and the geometry of the spindle is the same, there isn't a lot you can do. What they need is more caster. Combined with a spring, spindle and swaybar, they can be made to handle very well. The A-arms can be made to correct the ball joint angles, assist in camber gain, and get the caster in line. And this is what you need. I have about six sets of arms in my shop that I am testing to find out what they REALLY DO, and DONT. So, be a little patient and I'll let you know what I find out.