The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

K5 MAX · 09-20-2018, 11:43 PM

Removed the 4 rear body bolts and bushings (#2-#5) on both sides (loosened #1 under the floor boards) so I could clean the frame and body mount locations to prep for POR15 before the new body mounts and tank goes in. Gonna try to do the frame paint in sections because I don't plan to pull the body off until the full restoration happens down the road. Blocked the body so I could get to everything

My method to get the body up to block it

75

76

61

62

63

Had to remove the bracket (at the frame) that held the rear flexible brake line to the top of the axle, it was in the way of the new 31 gallon tank

64

09-20-2018, 11:43 PM	#5
K5 MAX Registered User Join Date: Jan 2017 Location: Panama City, FL Posts: 120	Re: Project Gumby Phase 1 Removed the 4 rear body bolts and bushings (#2-#5) on both sides (loosened #1 under the floor boards) so I could clean the frame and body mount locations to prep for POR15 before the new body mounts and tank goes in. Gonna try to do the frame paint in sections because I don't plan to pull the body off until the full restoration happens down the road. Blocked the body so I could get to everything My method to get the body up to block it 75 76 61 62 63 Had to remove the bracket (at the frame) that held the rear flexible brake line to the top of the axle, it was in the way of the new 31 gallon tank 64 __________________ 1972 K5 Blazer 350/350/PS/PB From GA but live in Panama City, FL Last edited by K5 MAX; 09-26-2018 at 11:46 AM.