Quote:
Originally Posted by speedygonzales
My suggestion is to isolate the brake pressure warning switch and go from there.
On the bottom of the EBCM (says Kelsey Hayes on it) facing the master cylinder is a connector. It's below the top row of 3 brake lines and between the 2 lower lines. Disconnect that and do the same things you been doing to get the light to come on.
See if the light won't come on.
Let us know what happens
|
Speedy: I unplugged that connector and took another test ride. I could still feel this issue in the pedal, but the light did not come on.
Quote:
Originally Posted by Mr_Rich
Since you hear it inside the cab I'm wondering if it could be physical problem with the switch hanging off the brake pedal pivot itself.
|
Mr Rich: I tried to look above the column where the switch probably is. Its hard to reach and see. There is a brace/bracket on either side if the column that makes it hard to get to.
The sound it make sounds like a spring twanging but not very loud and you can feel in in the pedal at the same time.