[randy500]

So here is how I managed to make the B pillar from the passenger side work on the drivers side, I think its unique but maybe its been done before.

The B pillar is 2 pieces, front and rear, I separated them, then looked at each piece, mostly the rear because It would be the hardest to make from scratch.
I finally came up with the idea that it has all the right shapes and if you cut it up in sections you could invert each section and use it on the drivers side, so I cut it into 4 pieces, turned each over and welded it back together. It turned out pretty nice. I meant to get a couple pics as I was building it but forgot.
I will number the pieces on the truck as it sits and explain it further, maybe it will help somebody out in the future.

One last picture of the side view...