Quote:
Originally Posted by botoepfer
Hi Chevy Fleetside,, are you saying the control arms from the 1983 cross member will bolt righ on the cross member of the 63? my reason for doing this is the Power brake , front disc brakes and Power steering
|
Yes they will bolt up. You can use all of the later model steering. You will have to redrill for the idler arm. The easy way to do that is to mount up the steering box first. You might also run into the problem of the truck steering to the left more then the right. I fixed this problem by cutting 1" off of the left tie rod end. I put 75 components under my 65 which has the same cross member you have. If you use the later model ones you will have to drill one hole and oblong another. If you have a C 20 then you will have to swap out the cross member. This is an early picture of my 65 with the 75 parts. I have since removed the steering box and used the rez kit to mount it. This was before I knew about Capt Fab.